I just finished assembling the Elator to compliment my Ceriatone OTS 50. If anyone has any questions let me know. Here is a list of some of the parts I used
Chassis - https://www.aliexpress.com/item/1005003694415425.html
I found someone local to engrave the front and rear faceplate
Power transformer I ordered from Ceriatone that is used on their C-Lator - send them an email for pricing
Most of the components were purchased from mouser, the LED and 20 gauge solid wire from Amazon. Shield wire was 18awg 600v
The chassis comes with feet but I installed taller feet I had on hand to clear the amp handle.
The add image button does not work so I will try again later...