Hi everyone, I'm in the process of building the BE100, but have run into a snag. The recommended PT for this build (40-17452 Magnetic Components) doesn't appear to be available any longer and that in fact the 'Classic Tone' company is no longer trading.
I note that the recommended PT has several output windings; 100v bias tap / HT (voltage unknown) / 6.3v filament heaters / AC power supply to GBU 8B.
In the event that the listed PT cannot be purchased, does anyone have the specs, or info on an equivalent model. I am using an old Marshall 2210 JCM800 chassis and I believe that the fitted OT will be okay, but would I be able to use the existing PT, (HT in the 350v - 370v region) but perhaps with an additional small transformer to provide the AC supply for GBU 8B and if so, what spec would this additional transformer have to meet?
Many thanks for any help,
Kev
Hi Kev,
Have a look at inMadOut: https://www.inmadout.com/download/pdf/TA34M100.pdf
I normally get all my iron from him (the owner, Savino Luce, is super helpful and know his stuff).
The specs are the following:
Cheers,
Andrea