Discrepancies between layout and schematics, #124

Hello friends!

I am waiting for my Dumble board and eyeing over the schematics.

I have found some differences between the Layout and Schematic files,

R25 and R24 is rated at 1W on the schematic but 3W on the layout. Can we get away with 1W in that position?

R14 Rated 1W on schematic but 3W on layout

R16 Rated 1W on schematic but 2W on layout

R53-R56 Rated 2W on schematic but 5W on layout, i have a feeling that 2W is too low for this position

C26 Rated 50V on schematic but 25V on layout

I would just err on the side of caution and go with the higher ratings, but itwould be good for future builders to know the actual required tolerances

C16 & C17 is stated as 20uf on schematic but 22uf on layout

C4 is 0,047uf on layout but 0,05uf on schematic

C36 is 0,047uf on layout but 0,05uf on schematic

I suspect that there are no sonic differences between these parts, but since we are dealing with a "corksniffer" amp here it would be good to know what the original values are.

Perhaps you can enlighten me AA?