newly finished build, when i switch channels the led's light and switch but the relays do not switch. the amp is working perfect but it is stuck in overdrive. i have 5v coming out of the regulator, the switch and pedal jack both toggle the led's on and off. not sure what else to check? i have 5v on the N1007 diodes next to the relay coils. so i must not be getting the ground to energize the coils? did i miss a jumper?

Hello I wanted to document my build of a AA Solo 100. I am an expierenced amp builder but I have never built a Soldano before. This seemed like the perfect amp to try one of AA's PCB's out on. Using for this build: • C3 Chassis • Hammond 1750D 100w 2.3k Output transformer • Onetics SLO 100 Power Transformer • Hammond 193J 10H 200MA choke • BOM listed on this site with following modifications • Sprauge Oragnge Drop .022 passing capacitors • Mojo CTS style pots • neutrik Combo slave jack. XLR TRS 1/4" ( H1750D has a Balanced feedback tap on the transformer, want to try with cabinet IR's direct into DAW)) Started it this week just waiting for all the rest of the parts to arrive! Cheers DEXTER